PIKO R30 and M30 firewood processors

The PIKO R30 and M30 are firewood processors that allow you to produce quality firewood quickly and lightly thanks to fully hydraulic control.
R30 mobiili

PIKO R30 and M30 are equipped with an optimized split, whereby the length of the split is controlled by using the valve. If you are preparing e.g. 35 cm firewood, you only need to split about 45 cm (max splitting movement 55 cm) and you can restore the split and immediately cut the next tree. This has the advantage of working faster. You can also interrupt the split if there is a problem with the position of the tree.

PIKO R30 and M30 are equipped with a 4 m long discharge conveyor that can be turned laterally. All models have a hydraulic feed table as standard, which makes working effortless.

Piko ice machines are available in two different basic versions – tractor-powered R30 and car-towed M30. In the M30 model, the wood is lifted into the machine and fed using a hydraulic 2-lever control valve.

It is also possible to install a hydraulic tree lifter on the R30 Mali, which is an accessory.

The R30 model has Additional hydraulics plugs, which can be used, for example, to use a hydraulic frame table. The feed of the machine equipped with a hydraulic carpet feeder is controlled directly from the hydraulics valve, and this model also uses Additional hydraulics plugs.

The modern design, ergonomics, and ease of use make the work of shingles effortless with the PIKO R30 and M30 folding machines! Instructional video 

Specifications
Maximum tree diameter 300 mm
Minimum tree diameter 50 mm
Firewood length (min – max) 300–550 mm
Weight 720 – 825 kg
Saw blade
Flange 13”/325/1.3mm/56
Chain 325 / 1.3 mm / 56
Splitting cylinder thrust 5 tons
Cylinder stroke 600 mm
Adjustable splitting blade 2/4
The length of the hydraulic conveyor is 4 m
Hydraulic oil requirement 55 l
Hydraulic pressure 180 bar
Drive: R30 tractor-driven and electric, M30 internal combustion engine 17.5 HP/500cc Brigg&Stratton
Towed M30 registered for road use (no brakes)

PIKO CLEANER cleaning drum

The PIKO CLEANER is a cleaning pump for cleaning valves. It separates debris from the firewood, resulting in higher quality firewood and minimizing the risk of mold.

The PIKO Cleaner is fully self-contained and can therefore be connected to almost all models of valve machines. The discharge conveyor of the flap machine feeds flaps into the drum, which, after passing through the drum, are transferred by the discharge conveyor into, for example, sacks. The swiveling conveyor allows the bags to be placed side by side.

PIKO Cleaner on saatavissa sähkö- tai hydraulikäyttöisenä. Poistokuljettimen pituus on 2.1m, joka säädettävissä sivusuunnassa kolmeen eri asentoon. Kuljettimen purkukorkeus säädettävissä. Max korkeus poistokuljettimen päälle on noin 3.5m

Kuvissa sähkömoottorimalli.